ㄇ形梁剪力滞效应的解析解

精确分析ㄇ形梁在纵横向荷载共同作用下,其横断面上正应力分布规律对于计算其有效宽度有重要意义,应用力法原理,先将ㄇ形梁和翼板截开成矩形截面梁和平面应力板,在截面上代之以赘余的分布剪力,对于平面应力板,通过利用板变形的对称性来简化其边界条件,然后假设一个满足板的控制方程的Airy应力函数求得板的应力和位移,再利用Timoshenko梁理论求得梁的挠度和转角,根据截面上梁与板的纵向位移相等的变形协调条件便可最终确定截面上的分布剪力,给出的数值算例验证了方法的有效性,并与铜陵长江公路大桥主梁的模型有限元结果和试验结果作了对比,解析解法还可用来检验其他各种数值计算方法的精度,并可推广到其他多跨薄壁结构梁桥的膜应力分析中。     

组合结构体的控制爆破拆除

根据待拆构筑物的结构特点和周围环境，分析论述构件倒塌的可能性。因地制宜选择，制定出合理的爆破方案。并通过对爆破参数，起爆网络，安全防护等进行精心设计和施工，拆除爆破达到了预期的效果。     

永升城基础大体积混凝土施工的裂缝预控

基础大体积混凝土施工的裂缝控制 ,从分析产生裂缝的原因来阐述 ,将冷缝作为结构性裂缝来预控     

The relative permeability of concrete using nitrogen gas

A modified version of a test, originally proposed by BRE (UK), was used to assess relative permeability to nitrogen gas of concretes cured in various ways. Three simple parameters from test plots clearly showed the effects of duration of water curing, followed by drying to constant mass at 50°C; test specimen moisture content was dominant and drying at 105°C reduced differences between concretes of very different quality. Convincing evidence was not found of differences between upper and lower ‘halves’ of cylinders nor between cast and cored ones.     

基于数字机顶盒的电子选单的设计和实现

基于CATV和PSTN的VOD多媒体数字机顶盒，提出了几种实现双向通信以完成电子节目指南的设计方案，对各种方案的优缺点进行了详细的讨论，并介绍了所采用方案的实现方法。     

交通平衡分配下的公路桥收费策略

假定一个城市被一条河流分为两部分（如我国的武汉，重庆等市），河上至少架设了两座公路桥梁，本文研究在交通平衡状态下，怎样制定车辆过桥梁的收费水平，使获得的总收入最大，乘客的总行驶时间最少，对多车种问题，研究了等价的数学模型和算法。还对一个含两座桥梁与三种车型的简单算例，进行了计算与分析。     

关于后张预应力混凝土结构优化设计的几个问题

结合UP软件编程实践，本文对后张预应力混凝土结构计算程序中引入优化功能的意义进行了论述，提出了预应力筋与普通钢筋之间的最优搭配关系，优化原点概念及相关影响因素，列出了优化计算程序所应涉及的基本计算内容，并对当前后张预应力混凝土结构设计中的一些观点提出了不同意见。     

夏季施工中砼质量存在问题与对策

分析了夏季砼施工中存在的突出问题 ,并论述了质量保证措施。     

The influence of the fabrication process on the buckling of thin-walled steel box sections

Steel box sections are usually fabricated from flat plates which are welded at the corners. The welding process can introduce residual stresses and geometric imperfections into the sections which can influence their strength. For some thin-walled sections, large periodic geometric imperfections have been observed in manufactured sections. Subsequent investigations have indicated that the imperfections are in fact buckling deformations i.e. the box section has buckled due to welding residual stresses prior to any application of external load. The welding procedure and the behaviour of the box sections under load has been modelled using a finite element analysis that accounts for both geometric and material non-linearities. Tests have been carried out on box sections with a range of width to thickness ratios for the plate elements. Modelling has been shown to give good correlation with the test results. The conditions for buckling to take place as a result of the welding process have been established. A design method has been proposed.     

混凝土小型砌块建筑裂缝宽度的标准设置研究

通过对混凝土小型空心砌块单片墙进行试验 ,了解不同构造措施墙体的初始裂缝在墙体上出现的部位、形态、发展规律以及墙体最终破坏形态 ,并通过试验明确墙体在不同受力状态下的裂缝形态 ,最后根据试验结果初步提出混凝土小型空心砌块建筑的裂缝宽度控制标准